Mincon MP180QL200 Hammer
The Mincon MP180 hammer has been designed to provide excellent drilling performance in all types of conditions while reducing the energy cost to do so. The tool can be used in all types of drilling applications and excels in simultaneous casing drilling for standalone piles and interlocked-casing drilling for pipe-pile walls.
Key Features and Benefits
- Lower air consumption than competitor hammers, reducing overall operating costs and bringing savings throughout the serviceable life of the tool
- High-frequency piston cycle operates above the ground’s nominal frequency, mitigating transmission of vibration to nearby structures
- Valveless, high-frequency design ensures smooth operation
- Hardened wear-sleeve for optimum wear resistance even in the most abrasive conditions
- Multi-start threads on backhead and chuck ensure easy coupling/uncoupling of hammer
- Unique internal mount system eliminates the need for wear shims and special assembly tools
- All critical internal components are heat-treated under strict control to maximise tool longevity
For more information:
+40 314 253 800
info@romned.ro
Ron van Dam
CEO
| Specifications | Metric |
| Hammer Outside Diameter | 400mm (15.74″) |
| Hammer Length (Less Bit, Backhead Shoulder to Chuck) | 1582mm (62.28″) |
| Drill Bit Shank Type | QL200 |
| Minimum Bit Size (rock) | 457mm (18″) |
| Minimum Bit Size (overburden) | 508mm (20″) |
| Hammer Weight (Less Bit) | 1,241kg (2,736 lbs) |
| Piston Weight | 284kg (626 lbs) |
| Make up Torque | 18300 – 24400Nm (13500 – 18000 lbf.ft) |
| Wear Sleeve Reverse Limit | Not reversible |
| Wear Sleeve Discard Limit | 381mm (15″) |
| Recommended Minimum Air Package | 1038 l/s @ 13.8 bar (2200cfm @ 200psi) |
| Item # | Part Number | Description |
| MD1801AS02 | Mincon MP180-QL200 (8 5/8″ A.P.I. Reg. Pin) | |
| 1 | MD1830CP01 | Backhead tube circlip |
| 2 | MD1816TB02 | Backhead Tube (8 5/8″ API Insert) |
| 3 | MD1823OR01 | O-Ring |
| 4 | MD1806CH01 | Choke Blank |
| 5 | MD1802CV01 | Check Valve |
| 6 | MD1803SP01 | Check Valve Spring |
| 7 | MD1819BI01 | Backhead insert (8 5/8” API Reg Pin) |
| 8 | MD1817BO06 | Backhead Insert Break out ring |
| 9 | MD1841BD01 | Backhead-Distributor Assembly |
| 10 | MD1817BO02 | Backhead Breakout Ring |
| 11 | MD1820OR01 | O-Ring |
| 12 | MD1821OR01 | O-Ring |
| 13 | MD1808IC01 | Inner Cylinder |
| 14 | MD1804SM01 | Make-up Ring |
| 15 | MD1805LR01 | Lock Ring |
| 16 | MD1812PR01 | Retaining Ring |
| 17 | MD1810PN02 | Piston |
| 18 | MD1811WS01 | Wear Sleeve |
| 19 | MD1812PR01 | Retaining Ring |
| 20 | MD1813BB02 | Aligner |
| 21 | MD1822OR01 | O-Ring |
| 22 | MD1814BR02 | Bit Retaining Ring |
| 23 | MD1220OR01 | O-Ring |
| 24 | MD1817BO04 | Chuck Breakout Ring |
| 25 | MD1820OR01 | O-Ring |
| 26 | MD1815CK02 | Chuck (QL200) |
| 27 | MD1818CB02 | QL200 Chuck Bush |
| 28 | MD-QL200DP | Drive Pin x 9 |
| MD1826SK02 | Service Kit | |
| MD1826SK02 | Service Kit | |
| 1 | MD1806CH01 | Choke Blank |
| 2 | MD1803SP01 | Spring |
| 3 | MD1825OK02 | O Ring Kit |
| 4 | MD1830CP01 | Backhead Tube Circlip |
| MD1825OK01 | O Ring Kit | |
| 1 | MD1820OR01 | O Ring |
| 2 | MD1821OR01 | O Ring |
| 3 | MD1822OR01 | O Ring |
| 4 | MD1220OR01 | O Ring |
| 5 | MD1823OR01 | O Ring |
| MD1842PT01 | Piston Lifting Tool Assembly (optional) | |
| D1843HT01 | Hammer Lifting Tool Assembly (optional) |
Air Pressures are given for compressors operating at seal level at 20° C (68º F). Corrections to actual compressor volume should be made to account for temperature, altitude and relative humidity.
- Hammers specifications
- Parts and Specifications